Product Details
|
Advantage? PS Filter Cartridges
編號(hào)：
High Flow Rate Capability
With Polyethersulfone
Membrane Filter Cartridges
With Polyethersulfone
Membrane Filter Cartridges
High Flow Rate Capability
With Polyethersulfone
Membrane Filter Cartridges
The General Grade polyethersulfone membrane
cartridges are specifically designed to provide superior
flow rates at an economical cost. The unique construction
features a high-surface area design that allows for excellent
flow rates and high particle removal efficiency. Hydrophilic
polyethersulfone membrane cartridges require no prewetting
and are ready to use. All materials of construction are the
same as used in the electronics grade Mega-Pure series
polyethersulfone cartridges from Parker. This assures a cost
effective device while maintaining excellent performance in
UPW pad applications and other recirculation applications.
The General Grade is also ideal for final filtration of water and
aqueous solutions in plating, chemical process, photographic,
food and beverage and bulk pharmaceutical applications.
The General Grade Polyethersulfone Membrane Series is
available in 0.03μm, 0.1μm, 0.2μm, 0.45μm and 0.65μm pore
sizes.
Features and Benefits
Superior Polyethersulfone Membrane Yields
Maximum Filtration Results
■ High surface area design provides excellent flow rates
and extended filter life while maintaining high particle
removal efficiency.
■ Spunbonded polypropylene support materials
eliminate sites for potential shedding and increased
particle counts.
■ Provides broad chemical compatibility.
■ Excellent resistance to most sanitizing agents.
General Grade Membrane Series
Advantage? PS
Filter Cartridges
■ Polyethersulfone Membrane
Parker’s TQM System Assures Consistent
Performance and Reliable Filtration
■ Thermally welded, eliminating adhesive extractables.
■ Biosafe in accordance with USP Class VI-121°C
Plastics Tests.
■ Specifically designed to ensure cleanliness.
■ All materials of construction are FDA listed as
acceptable for potable and edible liquid contact
according to CFR Title 21.
Applications
UHP Chemical
■ Specialty
Chemicals
■ Bulk
Photoresists
and Solvents
UHP Water
■ Central PAD
■ Polishing
Stations
Food & Beverage
■ Bottled Water
■ Wine
■ Beer
■ Process Water
■ Vinegar
■ Edible Oils
■ Aseptic Packaged
Liquids
Miscellaneous
■ Pre, Post and
Point-Of-Use DI
Water Filtration
■ Pharmaceutical
Intermediates
■ Plating Solutions
■ Bulk Chemicals
Specifications
Materials of Construction:
■ Membrane: hydrophilic
polyethersulfone
■ Membrane Support/Drainage:
polypropylene
■ Structural components: polypropylene
■ Seal Material: various
■ Sealing Method: thermal welding
Dimensions:
■ Diameter: 2.7 in (6.8 cm)
■ Lengths: 10-40 in (25-102 cm)
Surface Area (10 in cartridge):
■ Minimum 6.5 ft2 (0.6 m2)
Recommended Operating Conditions:
■ Maximum Temperature:
176°F (80°C) @ 30 ΔP (2.1 bar)
■ Maximum Differential Pressure:
Forward:
70 psi (4.8 bar) @ 77°F (25°C)
30 psi (2.1 bar) @ 176°F (80°C)
Reverse:
50 psi (3.4 bar) @ 77°F (25°C)
Endotoxins:
■ <0.25 eu/ml
Sterilization/Sanitization Methods:
■ Isopropyl Alcohol
■ Sodium Hydroxide
■ Hydrogen Peroxide
■ Hot Water: 190°F (88°C) @ 5 psid
(0.3 bar)
■ Autoclave: 250°F (121°C) for 30
minutes at 15 psi (1.0 bar)
■ In Situ Steam: 284°F (140°C) for 60
minutes at 15 psi (1.0 bar)
■ Chlorine
■ Sodium Hypochlorite
■ Sanitizing Agents (see Materials
Selection Guide, Bulletin C-770)
Installation Rinse-In:
■ Cartridges typically rinse to back
ground resistivity in less than five
minutes at 2 gpm/10" equivalent
