產(chǎn)品檢索
|
ZHFT/2C ZHFT-3C
HIGH FLOW TETPOR II is validated as a 0.2 micron sterilizing grade filter in liquids through ASTM F838-05 and in gas through full retention to an aerosol challenge of MS2 phage. This ensures the filter will guarantee the sterility of your process in the worst-case scenario where the filter may be subjected to bulk liquid due to a process problem.
市場
Life Sciences
微膠粒等級(ΜM)
0.2
過濾裝置
Pleated
介質
PTFE
預濾器材料
None
功能
Sterile filtration/Microbial control
工業(yè)標準
21 CFR Part 177 and current USP Plastics Class VI - 121 C and ISO10993 equivalents
品牌
Parker domnick hunter
Subtle changes to the structure of the hydrophobic PTFE have also resulted in the production of an extremely robust product, now validated for 225 steam sterilization cycles at 142 degrees Celcius (287.6 degrees Fahrenheit). The combination of non-woven supports upstream of the membrane and an expanded net layer downstream provides increased protection and service life while guaranteeing zero fibre shedding into the process.
HIGH FLOW TETPOR II is suitable for all sterile gas applications including fermentation inlet and off-gas streams, venting, lyophilisers, autoclave vacuum breaks and blow-fill-seal equipment as well as the provision of particle-free air within the electronics industry.
Features and Benefits:
? Steam sterilizable up to 225 cycles at 142 degrees Celsius (287.6 degrees Fahrenheit)
? Unrivalled flow rates combined with low pressure drops
? Fully validated to ASTM 838-05 for liquid bacterial challenge
? Fully validated to aerosol and viral challenge
? Integrity testable by all methods including water intrusion test
